Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /home/content/87/8714487/html/HSDstore/vsadmin/db_conn_open.php on line 14

Shopping cart  Shopping cart
0 Product(s) in cart
Total 0.00
» Checkout


Get social....
Keep updated on special offers, news and coupons.

Product detail

Home » Accessories

Aquaseal® Urethane Repair Adhesive & Sealant The industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For fast cure, use with Cotol-240™ Cure Accelerator. DIRECTIONS FOR NEOPRENE REPAIR: Clean damaged area with Cotol-240™ Cure Accelerator/Precleaner or solvent (paint thinner, nail polish remover or similar). Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal? to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces. Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240. HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with Aquaseal. Remove tape after full cure. SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces. HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance. WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying. CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes. Cotol Directions for use with Aquaseal® Urethane Repair Adhesive and Sealant: AS PRECLEANER:1.Apply a small amount to the damaged area (spot test for colorfastness). 2.Rub with a clean cloth until dry. 3.Repeat steps 1 and 2. 4.Apply Aquaseal as directed. Note: for best adhesion, first roughen non-fabric surfaces with sandpaper. AS CURE ACCELERATOR:1.Thoroughly mix 1 part cure accelerator with 3-4 parts Aquaseal® or using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate. 2.Immediately apply the mixture to the damaged area. 3.Allow the repair to completely cure at least 2 hours before using. CLEAN-UP: To remove Aquaseal® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.
Email Friend
Price: $7.99

« Previous | Next »

What is Scuba4Sale by High Sierra Divers? Scuba4Sale is the companion site to our Brick & Motar Store. Scuba Diving is our passion, and we love helping customers get their ideal set-up at the best possible prices almost as much as we love playing under water ourselves.
More Info
For your security
Terms and Conditions
Privacy Policy