Repairs
Scuba equipment is your life support system. It is extremely important to service your equipment annually as recommended by the manufacturers. Even if you have not used your equipment
during the year it should be serviced. Seats will take a 'set' just sitting and not being used. It is actually preferable to use your regulators than to have them sitting around unused. At the very least have an
'Bench Check' performed before you use the equipment
High Sierra Divers is a Full Service Facility. We have Factory Trained Technicians who perform
repair on most brands, including warranty service.

You may bring
your equipment to the store or send it to us via UPS or FedEx if it is too far or inconvenient for you to bring it into the store. You
can ask about current turn around time, Etc. by e-mailing us, or
call us on the phone. We check our E-mail each morning and will
call you, or e-mail you to confirm your repair.
Warranty
An annual service is necessary to keep your manufacturer's warranty valid.
For warranty service there are a few things that the manufacturers require require you to provide for the service to be performed under warranty:
" Proof of Original Ownership with Purchase Date
" Warranty certificate number if applicable
" Proof of Annual Service within the last 12 months.
|
We use industry standard up-to-date test equipment to evaluate, service & repair your equipment.
Call or bring your equipment by for a quote.
ANNUAL SERVICE -
An annual service includes:
Disassembly of the regulator and hoses
Cleaning of all components according to manufacturer recommendations.
Inspection of all components looking for cracks, wear and defects
Replacement of all warranty parts and worn or defective components
Reassembly of the regulator and hoses per manufacturer recommendations
Adjustment of the regulator to manufacturer specifications including intermediate pressure, flow rates and inhalation effort
|
BENCH CHECK -
A Bench Check includes:
Leak checking your regulators, hoses and pressure gauge.
Inspecting the hoses and mouthpieces for wear and tear.
Checking and re-adjusting if necessary the intermediate pressure.
Adjusting the regulator for the best breathing efficiency.
Checking the accuracy of the pressure gauge
Checking computer's battery status and replace batteries if necessary
We do not take your regulator apart to check or change any internal parts. If we find your regulator needs a complete service we will call for your OK before any work is performed.
|
|